Diseño para Seis Sigma: Enfoque para la fiabilidad y fabricación de bajo costo

Jesús Gerardo Cruz-Álvarez

doi:10.29105/rinn9.18-6

Autores/as

Jesús Gerardo Cruz-Álvarez Universidad Autónoma de Nuevo León

DOI:

https://doi.org/10.29105/rinn9.18-6

Palabras clave:

Análisis de Varianza, Diseño para Seis Sigma, Diseño Robusto, Experimentación Industrial, Metodología DMAIC

Resumen

El objetivo de la presente investigación es la promoción de una discusión teórica y practica sobre el enfoque tradicional de lanzamiento de nuevos productos bajo la metodología por fases. Una revisión a profundidad cómo las nuevas herramientas del desarrollo de nuevos productos en lo particular el diseño para seis sigma puede acelerar el tiempo de respuesta al mercado de forma exitosa y a una relación atractiva de costo – beneficio. Las nuevas herramientas pueden ser incorporadas dentro de la estrategia de
desarrollo de nuevos productos bajo el enfoque de planeación avanzada de la calidad de nuevos productos.

Descargas

Los datos de descargas todavía no están disponibles.

Métricas

Cargando métricas ...

Citas

Afazov, S.F., Becker, A.A., Hyde, T.H. (2012). Development of a Finite Element Data Exchange System for chain simulation of manufacturing processes. Advances in Engineering Software, 47(1), 104-113.

Afonso, P., Nenus, M., Paisana, A., and Braga, A. (2008), The Influence of Time to Market and Target Costing in the New Product Development Success. International Journal Production Economics, 115(2), 559-568.

APQP. (2007). Advanced Product Quality Planning. AIAG, 6. Retrieved from: https://www.aiag.org/source/Orders/index.cfm?section=orders&activesection=AiagPubs&task=0.

Atuahene-Gima, K. (1995). An exploratory analysis of the impact of market orientation on new product performance: A contingency approach. Journal of Product Innovation Management, 12(4), 275-293.

Azharul, K., M., Marcel, E., Amin, Md. Al. (2011). A method for evaluating lean assembly process at design stage. In The 9th Global Conference on Sustainable Manufacturing, 28-30 September 2011, LENEXPO Exhibition Center, St. Petersburg, 22-27.

Baker, W. E., & Sinkula, J. M. (2005). Market orientation and new product paradox. Journal of Product Innovation Management, 22(6), 483-502.

Baril, C., Soumaya, Y., Clément, B. (2011). Design for Six Sigma through collaborative multiobjective optimization. Computers & Industrial Engineering, 60(1), 43-55.

Breyfogle, F. W. III, (1999). Implementing six sigma: Smarter solutions using statistical methods. New York: Wiley-Interscience.

Chan, S.L., Ip, W.K., Kwong, C.W. (2011). Closing the Loop Between Design and Market for New Product Idea Screening Decisions. Expert Systems with Applications, 38(6), 7729-7737.

Chang, H.C., Tsai, M.T., Tsai, C.H. (2011). Complex Organizational Knowledge Structures for New Product Development Teams. Knowledge-Based Systems, 24(5), 652-661.

Chen, W., Wiecek, M. M., & Zhang, J. (1999). Quality utility – A compromise programming approach to robust design. Journal of Mechanical Design, 121(2), 179-187.

Cloke, B. (2000). Lean products start with lean design. Advanced Manufacturing, 2(2), 35-39.

Cooper, R.G. (2001). Winning at New Products: Accelerating the process from idea to launch. 3rd. New York [etc.]: Basic Books.

Cristiano, J. J., Liker, J. K., & White, C. C. III, (2000). Customer-driven product development through quality function deployment in the US and Japan. Journal of Product Innovation Management, 17(4), 286-308.

Eggert, R. J. (1991). Quantifying design feasibility using probabilistic feasibility analysis. In ASME Advances in Design Automation, 1991, New York, N.Y: American Society of Mechanical Engineers, 235-240.

Fernandez, B.I., Sabherwal, R. (2001). Organizational knowledge management: a contingency perspective, Journal of Management Information Systems, 18(1), 23-25.

Kano, N., Seraku, N., Takahashi, F., & Tsuji, S. (1984). Attractive quality and must be quality. Quality, 14(2), 39-48.

Fornell, C., & Wernerfelt, B. (1987). Defensive marketing strategy by consumer complaint management: A theoretical analysis. Journal of Marketing Research, 24(4), 337-346.

Freiesleben, J. 2010. Proposing a new approach to discussing economic effects of design quality, International Journal of Production Economics, 124(2), 348-359.

Goetsch, D. L., and Davis, S. B. (2010), Quality Management for Organizational Excellence: Introduction to Total Quality, New Jersey: Pearson Education.

Govindaluri, S.M.; Cho, B.R. (2007). Robust design modeling with correlated quality characteristics using a multicriteria decision framework, International Journal of Advanced Manufacturing Technology, 32(5-6), 423-433.

Griffin, J., Hauser, R. (1996). Integrating R&D and marketing: a review and analysis of the literature, Journal of Product Innovation Management, 13(3), 191-215.

Grinstein, A. (2008). The effect of market orientation and its components on innovation consequences: A meta-analysis. Journal of the Academy of Marketing Science, 36(2), 166-173.

Grunert, K., Verbeke, W., Kügler, J., Saeed, F., Scholderer, J. (2011). Use of consumer insight in the new product development process in the meat sector. Meat Science, 89(3), 251-258.

Handfield, R. B., Ragatz, G. L., Petersen, K. J., and Monczka, R. M. (1999), Involving Suppliers in New Product Development. California Management Review, 42(1), 59-82.

Heinzen, M., Höflinger, N. (2011). Engineers in R&D: The impact of human resource practices on combining lean product development and continuous innovation, Karlsruhe Institute of Technology, 49(2), 30-51.

Henderson, S., Bhalla, A., Chang, H.C., Huang, C.M. (2005). Initial study of R&D marketing interface theory within Taiwanese hi-tech industry, in: Conference of 2005 Technology Management ROC, Tainan, Taiwan.

Jahansson, H., Astrom, P., Orsborn, K. (2004). A system for information management in simulation of manufacturing processes, Advanced Engineering Software, 35(10-11),

-733.

Karim, M.A., Karim, M. A. Samaranayake, P. Smith, A. J. R. Halgamuge, S. K. (2009). An ontime delivery improvement model for manufacturing organizations. International Journal of Production Research, 99(1), 1-22.

Kirca, A. H., Jayachandran, S., & Bearden, W. O. (2005). Market orientation: A meta-analytic review and assessment of its antecedents and its impact on performance. Journal of Marketing, 69(2), 24-41.

OCDE. (2012). Global Competitiveness Report 2011-2012. Retrieved from: http://reports.weforum.org/global-competitiveness-2011-2012/-

Pang, J., Zhang, G., Chen, G. (2011). Application of aggregate analysis for product design quality using QFD model and TOPSIS. MECHANIKA, 17(6), 661-664.

Park, Y., Sungjoo, L. (2011). How to design and utilize online customer center to support new product concept generation. Expert Systems with Applications, 38(8), 10638-10647.

Pietrzyk, M., Madej, L., Weglarczyk, S. (2008). Tool for optimal design of manufacturing chain based on metal forming. CIRP Ann – Manufacturing Technology, 57(1), 309-312.

Plambeck, N. (2012). The development of new products: The role of firm context and managerial cognition. Journal of Business Venturing, 27(6), 607-621.

Rasli Muslimen, A. S. Z. A., Norzima Zulkifli, R. M. Y., Md. Ismail, Y. (2012). An Exploratory Study on the Critical Success Factors for Design Capabilities Development. Operations and supply chain management, 5(1), 14-26.

Rodríguez, J., Carbonell, P., Rodríguez, A. (2011). Speed or quality? How the order of market entry influences the relationship between market orientation and new product performance. International Journal of Research in Marketing, 28(2), 145-154.

Schulze, A., Heinzen, M., Mayrl, P., Schmitt, P., Heller, D., & Boutellier, R. (2010). Managing Lean Product Development: Mapping the literature. Unpublished Working Paper.

Sharma, J.R.; Rawani, A.M. (2007). Ranking customer requirements in QFD by factoring in their interrelationship values, Quality Management Journal, 14(4), 53-60.

Su, C., Chen, Y., & Sha, D. Y. (2006). Linking innovative product development with customer knowledge: A data-mining approach. Technovation, 26(7), 784-795.

Taguchi, G. (1993). Taguchi on robust technology development. New York: ASME Press.

Ulrich, K. (1995). The role of product architecture in the manufacturing firm. Research policy. 24(3), 419-440.

Walton, M. (1999). Strategies for Lean Product Development. Massachusetts Institute of Technology Working Paper Series, WP99-01-91, 91p.

Womack, J., & Jones, D. (1996). Lean thinking. Simon & Schuster: New York.

Yu, J.-C., & Ishii, K. (1998). Design for robustness based on manufacturing variations patterns. Journal of Mechanical Design, 120(2), 196-202.

Zhenyuan, J., Xiaohong, L., Wei, W., Defeng, J., Lijun, W. (2011). Design and Implementatio of Lean Facility Layout System of a Production line, 18(5), 260-269.